Brick slip external wall insulation in Nottingham
If you live in Nottingham (NG1) and your walls are solid, system-built or simply cold, brick slip external wall insulation may be the most effective upgrade you can make without losing any room inside.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Nottingham
Nottingham is in the NG1 postcode district. 6 other towns we cover are within 25 miles.
We arrange surveys in Nottingham (NG1) at a time that suits you, and cover neighbouring West Bridgford, Arnold and Hucknall too.
We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Nottingham home.
Brick slip EWI near Nottingham: West Bridgford (2 miles), Arnold (3 miles), Hucknall (6 miles), Long Eaton (6 miles), Ilkeston (7 miles), Heanor (9 miles).
Cost in Nottingham
Guide prices for brick slip external wall insulation in Nottingham run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
The final figure depends on wall area, the number of windows and doors, the finish and how much work the roofline, sills and services need.
Key facts
- Finish
- Real clay brick slips, 10–20mm
- Corners
- L-shaped corner slips
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Very durable, low-maintenance face
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Nottingham
- Insulated cladding
- Mineral & silicate render
- Pebbledash & dry dash EWI
- Solid wall insulation
- Non-traditional houses
- Bungalow EWI
- Semi-detached EWI
- Park home insulation
Rules that apply in Nottingham
- Funding
- Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Nottingham: questions
Is building control approval needed for brick slip external wall insulation in Nottingham?
Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.
How long will the work take in Nottingham?
Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.
Which EWI system suits homes in Nottingham?
It depends on the walls. Most brick houses in Nottingham suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.
Brick slip EWI | Brick slip EWI in Nottinghamshire | All services in Nottingham