Brick slip external wall insulation in Long Eaton
Homeowners in Long Eaton look at brick slip external wall insulation for warmer rooms, lower heat loss and a new exterior in one job. Here is how it works, what it costs and which England rules apply.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Long Eaton
Long Eaton is in the NG10 postcode district, about 9 miles from Derby. 6 other towns we cover are within 25 miles.
Our Long Eaton surveys cover the NG10 district and the surrounding area, including Ilkeston, Nottingham and West Bridgford.
Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Long Eaton home sets out how each detail will be built.
Brick slip EWI near Long Eaton: Ilkeston (5 miles), Nottingham (6 miles), West Bridgford (6 miles), Heanor (9 miles), Derby (9 miles), Arnold (9 miles).
Cost in Long Eaton
Guide prices for brick slip external wall insulation in Long Eaton run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
The final figure depends on wall area, the number of windows and doors, the finish and how much work the roofline, sills and services need.
Key facts
- Finish
- Real clay brick slips, 10–20mm
- Bond
- Stretcher, Flemish-effect or to match
- Corners
- L-shaped corner slips
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Very durable, low-maintenance face
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Long Eaton
- Mineral wool EWI
- Insulating lime render
- Mineral & silicate render
- Non-traditional houses
- Bungalow EWI
- Terraced house EWI
- Flats & low-rise blocks
- Failed EWI remediation
Rules that apply in Long Eaton
- Funding
- Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Long Eaton: questions
Do I need planning permission for external wall insulation in Long Eaton?
On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
Is building control approval needed for brick slip external wall insulation in Long Eaton?
Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.
Which EWI system suits homes in Long Eaton?
It depends on the walls. Most brick houses in Long Eaton suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.
Brick slip EWI | Brick slip EWI in Derbyshire | All services in Long Eaton