Brick Slip EWI in Portslade | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Portslade

Portslade is in the BN41 postcode district, about 3 miles from Brighton. 6 other towns we cover are within 25 miles.

We arrange surveys in Portslade (BN41) at a time that suits you, and cover neighbouring Hove, Brighton and Worthing too.

We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Portslade home.

Brick slip EWI near Portslade: Hove (2 miles), Brighton (3 miles), Worthing (7 miles), Rottingdean (7 miles), Burgess Hill (9 miles), Haywards Heath (12 miles).

Cost in Portslade

Guide prices for brick slip external wall insulation in Portslade run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.

Key facts

Corners: L-shaped corner slips
Weight: Heavier than render; anchor pattern checked
Best for: Brick streets, planning-sensitive fronts

Why choose it

Keeps a real brick appearance
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Portslade

Rules that apply in Portslade

Funding: Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Portslade: questions

Is building control approval needed for brick slip external wall insulation in Portslade?

Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.

Do you cover Hove as well as Portslade?

Yes. From Portslade we also cover Hove, Brighton and Worthing, and the rest of East Sussex.

Which EWI system suits homes in Portslade?

It depends on the walls. Most brick houses in Portslade suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in East Sussex | All services in Portslade

Brick slip external wall insulation in Portslade