Brick Slip EWI in Brighton | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Brighton

Brighton is in the BN1 postcode district. 6 other towns we cover are within 25 miles.

We arrange surveys in Brighton (BN1) at a time that suits you, and cover neighbouring Hove, Portslade and Rottingdean too.

We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Brighton home.

Brick slip EWI near Brighton: Hove (1 mile), Portslade (3 miles), Rottingdean (4 miles), Burgess Hill (9 miles), Worthing (10 miles), Seaford (11 miles).

Cost in Brighton

Guide prices for brick slip external wall insulation in Brighton run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Bays, gables, conservatory junctions and narrow side passages take longer than plain walls, so the survey prices your actual house rather than an average.

Key facts

Bond: Stretcher, Flemish-effect or to match
Insulation underneath: EPS or mineral wool, as certified
Weight: Heavier than render; anchor pattern checked

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Brighton

Rules that apply in Brighton

Planning: On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Brighton: questions

Is building control approval needed for brick slip external wall insulation in Brighton?

Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.

Is VAT charged on brick slip external wall insulation in Brighton?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

Do you cover Hove as well as Brighton?

Yes. From Brighton we also cover Hove, Portslade and Rottingdean, and the rest of East Sussex.

Brick slip EWI | Brick slip EWI in East Sussex | All services in Brighton

Brick slip external wall insulation in Brighton