Brick slip external wall insulation in Dundee
If you live in Dundee (DD1) and your walls are solid, system-built or simply cold, brick slip external wall insulation may be the most effective upgrade you can make without losing any room inside.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Dundee
Dundee is in the DD1 postcode district. 6 other towns we cover are within 25 miles.
We arrange surveys in Dundee (DD1) at a time that suits you, and cover neighbouring St Andrews, Forfar and Arbroath too.
We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Dundee home.
Brick slip EWI near Dundee: St Andrews (11 miles), Forfar (12 miles), Arbroath (16 miles), Blairgowrie (16 miles), Perth (18 miles), Glenrothes (20 miles).
Cost in Dundee
Guide prices for brick slip external wall insulation in Dundee run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Bays, gables, conservatory junctions and narrow side passages take longer than plain walls, so the survey prices your actual house rather than an average.
Key facts
- Finish
- Real clay brick slips, 10–20mm
- Weight
- Heavier than render; anchor pattern checked
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Very durable, low-maintenance face
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Dundee
- Insulated cladding
- Insulating lime render
- Silicone render finish
- Detached house EWI
- Flats & low-rise blocks
- EWI repairs
- Failed EWI remediation
- EWI surveys
Rules that apply in Dundee
- Building regulations
- An external wall insulation cladding system on a house normally needs a building warrant under the Building (Scotland) Regulations; only minor like-for-like repairs to an existing system are exempt. Section 6 of the technical handbooks sets the energy standards.
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Dundee: questions
Do you cover St Andrews as well as Dundee?
Yes. From Dundee we also cover St Andrews, Forfar and Arbroath, and the rest of Dundee and Angus.
How long will the work take in Dundee?
Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.
Which EWI system suits homes in Dundee?
It depends on the walls. Most brick houses in Dundee suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.
Brick slip EWI | Brick slip EWI in Dundee and Angus | All services in Dundee