Brick slip external wall insulation in Arbroath
Every brick slip external wall insulation job in Arbroath starts with a free survey of your walls: what they are built from, how they have weathered, and what the details around windows, eaves and services will need.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Arbroath
Arbroath is in the DD11 postcode district, about 16 miles from Dundee. 3 other towns we cover are within 25 miles.
Our Arbroath surveys cover the DD11 district and the surrounding area, including Forfar, Dundee and St Andrews.
Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Arbroath home sets out how each detail will be built.
Brick slip EWI near Arbroath: Forfar (13 miles), Dundee (16 miles), St Andrews (17 miles).
Cost in Arbroath
Guide prices for brick slip external wall insulation in Arbroath run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Whole-house prices include standard scaffolding, beads, sills and refitting services; unusual access, footpath licences and wall repairs are quoted separately.
Key facts
- Finish
- Real clay brick slips, 10–20mm
- Insulation underneath
- EPS or mineral wool, as certified
- Weight
- Heavier than render; anchor pattern checked
Why choose it
- Keeps a real brick appearance
- Very durable, low-maintenance face
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Arbroath
- EWI installation
- Phenolic EWI
- Wood fibre EWI
- Pebbledash & dry dash EWI
- Solid wall insulation
- Non-traditional houses
- Social housing EWI
- EWI for landlords
Rules that apply in Arbroath
- Funding
- Home Energy Scotland Grant and Loan offers up to £7,500 grant plus a £2,500 interest-free loan for solid wall insulation, with a rural and island uplift. You need a valid EPC recommending the measure, a TrustMark-registered installer, and a written offer before work starts. Warmer Homes Scotland helps eligible low-income households through its own installers. Our quotes are for privately funded work unless we confirm in writing that we can carry out a funded job. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Arbroath: questions
How much should I budget for brick slip external wall insulation in Arbroath?
Budget around £185–£265 per square metre of wall for the system and finish, plus scaffolding priced per house. The survey measures your walls in Arbroath and fixes the total in writing.
Is VAT charged on brick slip external wall insulation in Arbroath?
Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.
Do you cover Forfar as well as Arbroath?
Yes. From Arbroath we also cover Forfar, Dundee and St Andrews, and the rest of Dundee and Angus.
Brick slip EWI | Brick slip EWI in Dundee and Angus | All services in Arbroath