Brick Slip EWI in Uppingham | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Uppingham

Uppingham is in the LE15 postcode district, about 5 miles from Oakham. 6 other towns we cover are within 25 miles.

We arrange surveys in Uppingham (LE15) at a time that suits you, and cover neighbouring Oakham, Corby and Stamford too.

We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Uppingham home.

Brick slip EWI near Uppingham: Oakham (5 miles), Corby (6 miles), Stamford (11 miles), Market Harborough (11 miles), Kettering (13 miles), Melton Mowbray (14 miles).

Cost in Uppingham

Guide prices for brick slip external wall insulation in Uppingham run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.

Key facts

Insulation underneath: EPS or mineral wool, as certified
Weight: Heavier than render; anchor pattern checked
Best for: Brick streets, planning-sensitive fronts

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Uppingham

Rules that apply in Uppingham

Building regulations: Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Uppingham: questions

Do you cover Oakham as well as Uppingham?

Yes. From Uppingham we also cover Oakham, Corby and Stamford, and the rest of Rutland.

How long will the work take in Uppingham?

Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.

Which EWI system suits homes in Uppingham?

It depends on the walls. Most brick houses in Uppingham suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in Rutland | All services in Uppingham

Brick slip external wall insulation in Uppingham