Brick slip external wall insulation in Maghull
If you live in Maghull (L31) and your walls are solid, system-built or simply cold, brick slip external wall insulation may be the most effective upgrade you can make without losing any room inside.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Maghull
Maghull is in the L31 postcode district, about 7 miles from Liverpool. 6 other towns we cover are within 25 miles.
We arrange surveys in Maghull (L31) at a time that suits you, and cover neighbouring Kirkby, Litherland and Ormskirk too.
We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Maghull home.
Brick slip EWI near Maghull: Kirkby (3 miles), Litherland (4 miles), Ormskirk (4 miles), Bootle (5 miles), Formby (6 miles), Skelmersdale (7 miles).
Cost in Maghull
Guide prices for brick slip external wall insulation in Maghull run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Whole-house prices include standard scaffolding, beads, sills and refitting services; unusual access, footpath licences and wall repairs are quoted separately.
Key facts
- Finish
- Real clay brick slips, 10–20mm
- Insulation underneath
- EPS or mineral wool, as certified
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Very durable, low-maintenance face
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Maghull
- EWI installation
- Mineral wool EWI
- Phenolic EWI
- Insulated cladding
- Solid wall insulation
- Bungalow EWI
- Terraced house EWI
- Social housing EWI
Rules that apply in Maghull
- Building regulations
- Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved.
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Maghull: questions
How much should I budget for brick slip external wall insulation in Maghull?
Budget around £185–£265 per square metre of wall for the system and finish, plus scaffolding priced per house. The survey measures your walls in Maghull and fixes the total in writing.
Is VAT charged on brick slip external wall insulation in Maghull?
Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.
How long will the work take in Maghull?
Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.
Brick slip EWI | Brick slip EWI in Merseyside | All services in Maghull