Brick slip external wall insulation in Liverpool
Brick slip external wall insulation in Liverpool and across Merseyside, priced from a free survey and installed with photographs of every hidden detail.

What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Liverpool
Liverpool is in the L1 postcode district. 6 other towns we cover are within 25 miles.
We arrange surveys in Liverpool (L1) at a time that suits you, and cover neighbouring Birkenhead, Wallasey and Litherland too.
We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Liverpool home.
Brick slip EWI near Liverpool: Birkenhead (2 miles), Wallasey (4 miles), Litherland (4 miles), Bootle (4 miles), Bebington (4 miles), Huyton (6 miles).
Cost in Liverpool
Guide prices for brick slip external wall insulation in Liverpool run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Whole-house prices include standard scaffolding, beads, sills and refitting services; unusual access, footpath licences and wall repairs are quoted separately.
Key facts
- Corners
- L-shaped corner slips
- Weight
- Heavier than render; anchor pattern checked
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Very durable, low-maintenance face
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Liverpool
- Wood fibre EWI
- Insulated cladding
- Silicone render finish
- Mineral & silicate render
- Pebbledash & dry dash EWI
- Semi-detached EWI
- Flats & low-rise blocks
- EWI repairs
Rules that apply in Liverpool
- Funding
- Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Liverpool: questions
Is building control approval needed for brick slip external wall insulation in Liverpool?
Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.
Do you cover Birkenhead as well as Liverpool?
Yes. From Liverpool we also cover Birkenhead, Wallasey and Litherland, and the rest of Merseyside.
How long will the work take in Liverpool?
Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.
Brick slip EWI | Brick slip EWI in Merseyside | All services in Liverpool