Brick slip external wall insulation in Wigston
Homeowners in Wigston look at brick slip external wall insulation for warmer rooms, lower heat loss and a new exterior in one job. Here is how it works, what it costs and which England rules apply.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Wigston
Wigston is in the LE18 postcode district, about 4 miles from Leicester. 6 other towns we cover are within 25 miles.
Our Wigston surveys cover the LE18 district and the surrounding area, including Oadby, Leicester and Market Harborough.
Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Wigston home sets out how each detail will be built.
Brick slip EWI near Wigston: Oadby (2 miles), Leicester (4 miles), Market Harborough (10 miles), Hinckley (12 miles), Loughborough (14 miles), Coalville (15 miles).
Cost in Wigston
Guide prices for brick slip external wall insulation in Wigston run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.
Key facts
- Bond
- Stretcher, Flemish-effect or to match
- Insulation underneath
- EPS or mineral wool, as certified
- Weight
- Heavier than render; anchor pattern checked
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Wigston
- EPS insulated render
- Phenolic EWI
- Wood fibre EWI
- Pebbledash & dry dash EWI
- Solid wall insulation
- Non-traditional houses
- Bungalow EWI
- Terraced house EWI
Rules that apply in Wigston
- Funding
- Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Wigston: questions
Do I need planning permission for external wall insulation in Wigston?
On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
Is VAT charged on brick slip external wall insulation in Wigston?
Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.
Do you cover Oadby as well as Wigston?
Yes. From Wigston we also cover Oadby, Leicester and Market Harborough, and the rest of Leicestershire.
Brick slip EWI | Brick slip EWI in Leicestershire | All services in Wigston