Brick slip external wall insulation in Airdrie
Every brick slip external wall insulation job in Airdrie starts with a free survey of your walls: what they are built from, how they have weathered, and what the details around windows, eaves and services will need.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Airdrie
Airdrie is in the ML6 postcode district, about 10 miles from East Kilbride. 6 other towns we cover are within 25 miles.
Our Airdrie surveys cover the ML6 district and the surrounding area, including Coatbridge, Motherwell and Cumbernauld.
Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Airdrie home sets out how each detail will be built.
Brick slip EWI near Airdrie: Coatbridge (2 miles), Motherwell (5 miles), Cumbernauld (6 miles), Hamilton (7 miles), Wishaw (7 miles), Cambuslang (8 miles).
Cost in Airdrie
Guide prices for brick slip external wall insulation in Airdrie run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
What moves the price most is the board and finish you choose, the access around the house, and details such as roofline extensions or moving a gas meter.
Key facts
- Bond
- Stretcher, Flemish-effect or to match
- Insulation underneath
- EPS or mineral wool, as certified
- Weight
- Heavier than render; anchor pattern checked
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Airdrie
- Wood fibre EWI
- Insulating lime render
- Mineral & silicate render
- Non-traditional houses
- Bungalow EWI
- Flats & low-rise blocks
- EWI for landlords
- EWI repairs
Rules that apply in Airdrie
- Building regulations
- An external wall insulation cladding system on a house normally needs a building warrant under the Building (Scotland) Regulations; only minor like-for-like repairs to an existing system are exempt. Section 6 of the technical handbooks sets the energy standards.
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Airdrie: questions
Is VAT charged on brick slip external wall insulation in Airdrie?
Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.
Do you cover Coatbridge as well as Airdrie?
Yes. From Airdrie we also cover Coatbridge, Motherwell and Cumbernauld, and the rest of Lanarkshire.
Which EWI system suits homes in Airdrie?
It depends on the walls. Most brick houses in Airdrie suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.
Brick slip EWI | Brick slip EWI in Lanarkshire | All services in Airdrie