Brick Slip EWI in Canterbury | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Canterbury

Canterbury is in the CT1 postcode district, about 24 miles from Maidstone. 6 other towns we cover are within 25 miles.

We arrange surveys in Canterbury (CT1) at a time that suits you, and cover neighbouring Whitstable, Herne Bay and Faversham too.

We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Canterbury home.

Brick slip EWI near Canterbury: Whitstable (6 miles), Herne Bay (7 miles), Faversham (9 miles), Ashford, Kent (13 miles), Folkestone (14 miles), Deal (14 miles).

Cost in Canterbury

Guide prices for brick slip external wall insulation in Canterbury run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.

Key facts

Bond: Stretcher, Flemish-effect or to match
Corners: L-shaped corner slips
Insulation underneath: EPS or mineral wool, as certified

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Canterbury

Rules that apply in Canterbury

Building regulations: Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Canterbury: questions

Do I need planning permission for external wall insulation in Canterbury?

On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.

Are there grants for external wall insulation in Canterbury?

Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing.

Is VAT charged on brick slip external wall insulation in Canterbury?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

Brick slip EWI | Brick slip EWI in Kent | All services in Canterbury

Brick slip external wall insulation in Canterbury