Brick slip external wall insulation in Eastleigh
If you live in Eastleigh (SO50) and your walls are solid, system-built or simply cold, brick slip external wall insulation may be the most effective upgrade you can make without losing any room inside.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Eastleigh
Eastleigh is in the SO50 postcode district, about 5 miles from Southampton. 6 other towns we cover are within 25 miles.
We arrange surveys in Eastleigh (SO50) at a time that suits you, and cover neighbouring Southampton, Winchester and Totton too.
We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Eastleigh home.
Brick slip EWI near Eastleigh: Southampton (5 miles), Winchester (7 miles), Totton (7 miles), Hythe (8 miles), Fareham (11 miles), Cowes (14 miles).
Cost in Eastleigh
Guide prices for brick slip external wall insulation in Eastleigh run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
The final figure depends on wall area, the number of windows and doors, the finish and how much work the roofline, sills and services need.
Key facts
- Bond
- Stretcher, Flemish-effect or to match
- Weight
- Heavier than render; anchor pattern checked
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Eastleigh
- EPS insulated render
- Silicone render finish
- Mineral & silicate render
- Solid wall insulation
- Bungalow EWI
- Terraced house EWI
- Flats & low-rise blocks
- Social housing EWI
Rules that apply in Eastleigh
- Funding
- Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Eastleigh: questions
Do I need planning permission for external wall insulation in Eastleigh?
On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
Do you cover Southampton as well as Eastleigh?
Yes. From Eastleigh we also cover Southampton, Winchester and Totton, and the rest of Hampshire.
How long will the work take in Eastleigh?
Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.
Brick slip EWI | Brick slip EWI in Hampshire | All services in Eastleigh