Brick Slip EWI in Bordon | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Bordon

Bordon is in the GU35 postcode district. 6 other towns we cover are within 25 miles.

We arrange surveys in Bordon (GU35) at a time that suits you, and cover neighbouring Farnham, Aldershot and Fleet too.

We photograph every hidden layer as it goes on, so you have a record of what's behind the finish on your Bordon home.

Brick slip EWI near Bordon: Farnham (7 miles), Aldershot (10 miles), Fleet (12 miles), Godalming (12 miles), Farnborough (13 miles), Basingstoke (14 miles).

Cost in Bordon

Guide prices for brick slip external wall insulation in Bordon run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.

Key facts

Insulation underneath: EPS or mineral wool, as certified
Weight: Heavier than render; anchor pattern checked
Best for: Brick streets, planning-sensitive fronts

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Bordon

Rules that apply in Bordon

Funding: Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing. Grants guide
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Bordon: questions

Is VAT charged on brick slip external wall insulation in Bordon?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

How long will the work take in Bordon?

Two to six weeks on site for most houses, depending on size: bungalows are quicker, detached houses longer, weather allowing. Render isn't applied in rain or frost.

Which EWI system suits homes in Bordon?

It depends on the walls. Most brick houses in Bordon suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in Hampshire | All services in Bordon

Brick slip external wall insulation in Bordon