Brick Slip EWI in Streatham | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Streatham

Streatham is in the SW16 postcode district, about 5 miles from London. 6 other towns we cover are within 25 miles.

Nearby places we cover from Streatham include Mitcham (2 miles), Brixton (3 miles) and Wimbledon (3 miles), all in England.

Your quote will name the certified system, the board thickness and the calculated U-value for your walls, not a vague 'insulation package'.

Brick slip EWI near Streatham: Mitcham (2 miles), Brixton (3 miles), Wimbledon (3 miles), Battersea (3 miles), Croydon (3 miles), Morden (4 miles).

Cost in Streatham

Guide prices for brick slip external wall insulation in Streatham run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

The final figure depends on wall area, the number of windows and doors, the finish and how much work the roofline, sills and services need.

Key facts

Bond: Stretcher, Flemish-effect or to match
Corners: L-shaped corner slips
Weight: Heavier than render; anchor pattern checked

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Can brick slips match my existing bricks?

Slips come in a wide range of colours and textures, and a close match is often possible. An exact match to weathered Victorian brick is hard; we bring samples to the survey and you see them against your wall in daylight before ordering.

More services in Streatham

Rules that apply in Streatham

Building regulations: Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Streatham: questions

Do I need planning permission for external wall insulation in Streatham?

On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.

Are there grants for external wall insulation in Streatham?

Low-income households in homes rated below EPC C can apply for Warm Homes: Local Grant where their council is taking part. The Great British Insulation Scheme closed on 31 March 2026, and ECO4 closes on 31 December 2026; its final months are for finishing and putting right existing work. Grant schemes use their own approved installers, so check a scheme's installer rules before booking; our quotes are for privately funded work unless we confirm otherwise in writing.

Which EWI system suits homes in Streatham?

It depends on the walls. Most brick houses in Streatham suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in Greater London | All services in Streatham

Brick slip external wall insulation in Streatham