Brick Slip EWI in Islington | Prices & Free Survey

Brick slip external wall insulation in Islington

Every brick slip external wall insulation job in Islington starts with a free survey of your walls: what they are built from, how they have weathered, and what the details around windows, eaves and services will need.

£185–£265 per m²installed, slips and pointing included; scaffolding priced per house

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Islington

Islington is in the N1 postcode district, about 2 miles from London. 6 other towns we cover are within 25 miles.

Our Islington surveys cover the N1 district and the surrounding area, including Highbury, Holloway and Camden Town.

Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Islington home sets out how each detail will be built.

Brick slip EWI near Islington: Highbury (1 mile), Holloway (1 mile), Camden Town (2 miles), Chalk Farm (2 miles), London (2 miles), Archway (3 miles).

Cost in Islington

Guide prices for brick slip external wall insulation in Islington run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Whole-house prices include standard scaffolding, beads, sills and refitting services; unusual access, footpath licences and wall repairs are quoted separately.

Key facts

Finish: Real clay brick slips, 10–20mm
Bond: Stretcher, Flemish-effect or to match
Insulation underneath: EPS or mineral wool, as certified

Why choose it

Keeps a real brick appearance
Often an easier route through planning than render on brick streets
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Islington

Rules that apply in Islington

Planning: On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Islington: questions

How much should I budget for brick slip external wall insulation in Islington?

Budget around £185–£265 per square metre of wall for the system and finish, plus scaffolding priced per house. The survey measures your walls in Islington and fixes the total in writing.

Is building control approval needed for brick slip external wall insulation in Islington?

Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved. We arrange it as part of the job.

Is VAT charged on brick slip external wall insulation in Islington?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

Brick slip EWI | Brick slip EWI in Greater London | All services in Islington