Brick Slip EWI in Newton Abbot | Prices & Free Survey

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Newton Abbot

Newton Abbot is in the TQ12 postcode district. 5 other towns we cover are within 25 miles.

From Newton Abbot we also cover Torquay (6 miles away), Paignton (7 miles) and Exmouth (11 miles).

In exposed parts of Devon, we pay particular attention to how rain is shed at the eaves, sills and corners, where wind-driven water finds its way in.

Brick slip EWI near Newton Abbot: Torquay (6 miles), Paignton (7 miles), Exmouth (11 miles), Exeter (14 miles), Plymstock (24 miles).

Cost in Newton Abbot

Guide prices for brick slip external wall insulation in Newton Abbot run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.

Key facts

Finish: Real clay brick slips, 10–20mm
Weight: Heavier than render; anchor pattern checked
Best for: Brick streets, planning-sensitive fronts

Why choose it

Keeps a real brick appearance
Often an easier route through planning than render on brick streets
Can mix with render on side and rear walls to manage cost

Can brick slips match my existing bricks?

Slips come in a wide range of colours and textures, and a close match is often possible. An exact match to weathered Victorian brick is hard; we bring samples to the survey and you see them against your wall in daylight before ordering.

More services in Newton Abbot

Rules that apply in Newton Abbot

Building regulations: Insulating more than half of a wall, or more than a quarter of the whole building envelope, counts as renovating a thermal element under the Building Regulations, so the wall should reach 0.30 W/m²K where that is technically, functionally and economically feasible, and building control must be involved.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Newton Abbot: questions

How much should I budget for brick slip external wall insulation in Newton Abbot?

Budget around £185–£265 per square metre of wall for the system and finish, plus scaffolding priced per house. The survey measures your walls in Newton Abbot and fixes the total in writing.

Do you cover Torquay as well as Newton Abbot?

Yes. From Newton Abbot we also cover Torquay, Paignton and Exmouth, and the rest of Devon.

Which EWI system suits homes in Newton Abbot?

It depends on the walls. Most brick houses in Newton Abbot suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in Devon | All services in Newton Abbot

Brick slip external wall insulation in Newton Abbot