Brick slip external wall insulation in Armagh
Homeowners in Armagh look at brick slip external wall insulation for warmer rooms, lower heat loss and a new exterior in one job. Here is how it works, what it costs and which Northern Ireland rules apply.
What is brick slip external wall insulation?
Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.
Brick slip EWI around Armagh
Armagh is in the BT61 postcode district, about 13 miles from Craigavon. 6 other towns we cover are within 25 miles.
Our Armagh surveys cover the BT61 district and the surrounding area, including Portadown, Dungannon and Craigavon.
Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Armagh home sets out how each detail will be built.
Brick slip EWI near Armagh: Portadown (10 miles), Dungannon (11 miles), Craigavon (13 miles), Banbridge (15 miles), Newry (18 miles), Cookstown (20 miles).
Cost in Armagh
Guide prices for brick slip external wall insulation in Armagh run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.
Brick slips, cladding and mineral wool cost more than EPS and render; the survey shows you the difference side by side.
Key facts
- Bond
- Stretcher, Flemish-effect or to match
- Insulation underneath
- EPS or mineral wool, as certified
- Best for
- Brick streets, planning-sensitive fronts
Why choose it
- Keeps a real brick appearance
- Often an easier route through planning than render on brick streets
- Can mix with render on side and rear walls to manage cost
Why is a brick slip finish more expensive?
Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.
More services in Armagh
- EPS insulated render
- Phenolic EWI
- Insulating lime render
- Silicone render finish
- Flats & low-rise blocks
- EWI for landlords
- Failed EWI remediation
- EWI surveys
Rules that apply in Armagh
- Planning
- Planning in Northern Ireland is handled by the 11 councils. Changes that alter a house's appearance, work on flats, listed buildings and conservation areas should be checked with the council planning office before work is booked.
- VAT
- Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.
Checked October 2026. Rules change, so we confirm them for your address at survey.
Brick slip EWI in Armagh: questions
Is building control approval needed for brick slip external wall insulation in Armagh?
EWI is controlled under the Building Regulations (Northern Ireland) 2012, with energy standards in Technical Booklet F and fire in Technical Booklet E, so you need building control approval from your council. We arrange it as part of the job.
Is VAT charged on brick slip external wall insulation in Armagh?
Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.
Which EWI system suits homes in Armagh?
It depends on the walls. Most brick houses in Armagh suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.
Brick slip EWI | Brick slip EWI in County Armagh | All services in Armagh