Brick Slip EWI in Slough | Prices & Free Survey

Brick slip external wall insulation in Slough

Homeowners in Slough look at brick slip external wall insulation for warmer rooms, lower heat loss and a new exterior in one job. Here is how it works, what it costs and which England rules apply.

£185–£265 per m²installed, slips and pointing included; scaffolding priced per house

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Slough

Slough is in the SL1 postcode district, about 17 miles from Reading. 6 other towns we cover are within 25 miles.

Our Slough surveys cover the SL1 district and the surrounding area, including Windsor, Maidenhead and Gerrards Cross.

Most EWI failures start at the edges rather than the middle of a wall, so the quote for your Slough home sets out how each detail will be built.

Brick slip EWI near Slough: Windsor (2 miles), Maidenhead (5 miles), Gerrards Cross (6 miles), Uxbridge (6 miles), Egham (6 miles), Staines (7 miles).

Cost in Slough

Guide prices for brick slip external wall insulation in Slough run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

The final figure depends on wall area, the number of windows and doors, the finish and how much work the roofline, sills and services need.

Key facts

Bond: Stretcher, Flemish-effect or to match
Insulation underneath: EPS or mineral wool, as certified
Weight: Heavier than render; anchor pattern checked

Why choose it

Often an easier route through planning than render on brick streets
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Why is a brick slip finish more expensive?

Slips are a material cost on their own, they are laid by hand course by course, corners need special pieces, and the whole face is pointed. Expect brick slip finishes to cost noticeably more per square metre than render.

More services in Slough

Rules that apply in Slough

Planning: On a house, external wall insulation is usually permitted development if the finish looks similar to the existing walls. Render or cladding on a house in a conservation area, National Park, National Landscape (AONB), the Broads or a World Heritage Site needs planning permission. Flats and maisonettes have no householder permitted development rights, listed buildings need listed building consent, and an Article 4 direction can remove rights locally.
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Slough: questions

Is VAT charged on brick slip external wall insulation in Slough?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

Do you cover Windsor as well as Slough?

Yes. From Slough we also cover Windsor, Maidenhead and Gerrards Cross, and the rest of Berkshire.

Which EWI system suits homes in Slough?

It depends on the walls. Most brick houses in Slough suit EPS with silicone render; older stone or lime-built walls suit wood fibre or insulating lime render; and blocks need mineral wool. The free survey recommends one and explains why.

Brick slip EWI | Brick slip EWI in Berkshire | All services in Slough