Brick Slip EWI in Peterhead | Prices & Free Survey

Brick slip external wall insulation in Peterhead

If you live in Peterhead (AB42) and your walls are solid, system-built or simply cold, brick slip external wall insulation may be the most effective upgrade you can make without losing any room inside.

£185–£265 per m²installed, slips and pointing included; scaffolding priced per house

What is brick slip external wall insulation?

Brick slip external wall insulation is an EWI system finished with 10–20mm thick clay brick slips, bonded with adhesive onto a reinforced basecoat over the insulation and then pointed. Corner slips return around external corners so the finish reads as solid brickwork.

Brick slip EWI around Peterhead

Peterhead is in the AB42 postcode district. 1 other town we cover is within 25 miles.

Your quote will name the certified system, the board thickness and the calculated U-value for your walls, not a vague 'insulation package'.

Brick slip EWI near Peterhead: Fraserburgh (15 miles).

Cost in Peterhead

Guide prices for brick slip external wall insulation in Peterhead run from about £185 to £265 per square metre installed, slips and pointing included; scaffolding priced per house, with VAT at 0% on homes until 31 March 2027.

Bays, gables, conservatory junctions and narrow side passages take longer than plain walls, so the survey prices your actual house rather than an average.

Key facts

Finish: Real clay brick slips, 10–20mm
Corners: L-shaped corner slips
Insulation underneath: EPS or mineral wool, as certified

Why choose it

Keeps a real brick appearance
Very durable, low-maintenance face
Can mix with render on side and rear walls to manage cost

Can brick slips match my existing bricks?

Slips come in a wide range of colours and textures, and a close match is often possible. An exact match to weathered Victorian brick is hard; we bring samples to the survey and you see them against your wall in daylight before ordering.

More services in Peterhead

Rules that apply in Peterhead

Funding: Home Energy Scotland Grant and Loan offers up to £7,500 grant plus a £2,500 interest-free loan for solid wall insulation, with a rural and island uplift. You need a valid EPC recommending the measure, a TrustMark-registered installer, and a written offer before work starts. Warmer Homes Scotland helps eligible low-income households through its own installers. Our quotes are for privately funded work unless we confirm in writing that we can carry out a funded job. Grants guide
VAT: Installing insulation in a home is zero-rated for VAT until 31 March 2027, then 5%.

Checked October 2026. Rules change, so we confirm them for your address at survey.

Brick slip EWI in Peterhead: questions

How much should I budget for brick slip external wall insulation in Peterhead?

Budget around £185–£265 per square metre of wall for the system and finish, plus scaffolding priced per house. The survey measures your walls in Peterhead and fixes the total in writing.

Is building control approval needed for brick slip external wall insulation in Peterhead?

An external wall insulation cladding system on a house normally needs a building warrant under the Building (Scotland) Regulations; only minor like-for-like repairs to an existing system are exempt. Section 6 of the technical handbooks sets the energy standards. We arrange it as part of the job.

Is VAT charged on brick slip external wall insulation in Peterhead?

Not on installing insulation in a home at the moment: that's zero-rated until 31 March 2027, after which the rate is due to be 5%. Work on commercial buildings is standard-rated.

Brick slip EWI | Brick slip EWI in Aberdeen and Aberdeenshire | All services in Peterhead